Introduction of HSP Concrete Wet Guniting Machine
HSP Series wet shotcrete guniting machine is an equipment used for wet shotcrete. Compared with dry guniting machine, it has the advantages of little working dust, small rebound spray, protecting the environment, saving raw materials and improving the quality of shotcrete and other significant advantages like convenient operation and maintenance.
HSP Series wet shotcrete guniting machine is a new high efficient concrete machinery, mainly used for spraying wet concrete and the mixture can be mixed evenly, and the accurate control of water helps cement hydration, and thus little dust, rebound small, concrete homogeneity, and high strength.
This machine has many advantages, like reasonable structure, stable performance, easy operation and maintenance, long service life, widely be used in iron (public) road tunnel, subway, hydropower engineering, underground engineering and mine shaft shotcrete construction operations.
| No. |
Model |
Productivity |
Max Transmission Distance |
Aggregate Size |
Working Air Pressure |
Air Consumption |
Rotor Diameter |
Motor Power |
Voltage |
Weight |
| 1 |
HSP-5 |
5m3/h |
30m |
Φ15mm |
0.3-0.6MPa |
10—15/min |
438mm |
5.5KW |
380V |
800kg |
| 2 |
HSP-6 |
6m3/h |
30m |
Φ15mm |
0.4-0.6MPa |
10—15/min |
480mm |
6.5KW |
380V |
950kg |
| 3 |
HSP-7 |
7m3/h |
30m |
Φ15mm |
0.4-0.6MPa |
10—15/min |
505mm |
7.5KW |
380V |
1050kg |
| 4 |
HSP-9 |
9m3/h |
30m |
Φ20mm |
0.2-0.4MPa |
10—12/min |
455mm |
6.5KW |
380V |
1150kg |
Features of HSP Concrete Wet Guniting Machine
HSP Series wet shotcrete guniting machine greatly reduces the dust density by the machine and outside of nozzle when it works. Because of the easy-control, water-cement ratio, high degree of concrete cure, it can greatly improve the quality of shotcrete to improve the homogeneity of the concrete.
1. Through type rotary, non-sticky, unobstructed discharge, high efficiency and time-saving;
2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air;
3. Using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality;
4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete.
